Importer and Distributors of quality products to industry
Importer and Distributors of quality products to industry
Great Range of the basic products required for towing or recovery of Cars, Trucks, Loaders etc...
A growing range of trailer accessories that meet our NZ Standards for use on NZ roads..
Showing 1–16 of 59 results
Marine
* Dacromet Finish
* Amdel Tested
* ADR Compliant
* Ratio 10:1 & 5:1 & 1:1
* Suits Boats up to 20ft
* Detactable Handle
For Added Safety the Pawl is Heat Treated
Pro- Fisherman
* Dacromet Finish
* Amdel Tested
* ADR Compliant
* Ratio 15:1 & 5:1 & 1:1
* Suits Boats up to 20ft
* Detactable Handle
* Fitted 7mm Wire Cable 7.5m
For Added Safety the Pawl is Heat Treated
* 800mm Rubber Grip Sliding Protection Sleeve
* Manufactured to NZ Standards 4830:2001
* 2.5T Lashing Capacity (5.0T MBL)
* 50mm Webbing & Ratchet
* Heavy Duty 15mm Dia J Hooks
AISI316 C/W Anti-Loss Collar Pin
NZ Standards 5467:1993 requires safety connections for "Light Trailers" to be marked and rated.
LAZER Marked With;
* 2.5T MTM (Maximum Towing Mass)
* NZS5467 (NZ Standard)
* EB.2 (Manufacturer & Batch No.)
Dimensions
* 10mm Pin
* 23mm Inside Width
* 45mm Inside Length
NZ Standards 5467:1993 requires safety connections for "Light Trailers" to be marked and rated.
Marked With:
* 2.5T MTM (Maximum Towing Mass)
* NZS5467 (NZ Standard)
* AMG 0 (Manufacturer & Batch No.)
Dimensions
* 11.6mm Pin Dia
* 23mm Inside Width
* 35mm Inside Length
Protection: Hot Dipped Galvanized (HDG)
AISI316 - Captive Pin
NZ Standards 5467:1993 requires safety connections for "Light Trailers" to be marked and rated.
LAZER Marked With;
* 3.5T MTM (Maximum Towing Mass)
* NZS5467 (NZ Standard)
* EB.2 (Manufacturer & Batch No.)
Dimensions
* 11.8mm Pin
* 23mm Inside Width
* 42mm Inside Length
New 3.5T Rating to fit both 8mm & 10mm Rated Trailer Chain
* Supplied with Latch, M12 Bolts & Nyloc Nuts
* Forged Alloy Steel
* Quenched & Tempered
* Bolt Hole 13mm Dia
* Holes Centre to Centre 35mm
* Using 6T MBL Tiedown Webbing
* HD Webbing 50mm x 2.3m Finished
* 70mm Flat Eye
* 50mm 2PLY Blue Tie Down Webbing MBL 5.0T
* 50mm 2PLY Blue Tie Down Webbing MBL 5.0T
Assembled using
*2.5T Titan HD Ratchet 50mm
*10 Links of 7.3mm G70 Transport Chain
* 1 of SLR Connector 6mm
* Using 6T MBL Tiedown Webbing
* HD Webbing 50mm x 2.5m Finished
* 50mm Reduced Eye (To suit 8mm SLR Connector)
* 50mm Polyester Webbing
* Minimum Breaking Load 5000kg
* Full Eye Protection
* Length 3.65m
