Importer and Distributors of quality products to industry
Importer and Distributors of quality products to industry
Showing 65–80 of 86 results
TiTAN G80 Wide Mouth Dee Shackle
Fully Complies with EN1677
Safety Factor 4:1
Standards Tolerance: +8% to -5%
Material Alloy Grade 80
Supplied By AMG/TiTAN Australia
Finish: Electro Galvanized then Painted
Clearly Marked with...
Brand, Grade, Size, Rating & ID Batch No., CE
* Double the Rating for Pulling Applications
4x4 Recovery Snatch Straps
* Reinforced Eye Protection
* Heavy Nylon Webbing
* 8.0T MBS - 1Ply YELLOW 60mm Wide
* 16.0T MBS - 2Ply ORANGE 60mm Wide
* 20% Stretch Elongation
For TiTAN Rated Grade Safety Shackles
Factor Pack Consists Off
10 off 8.0mm x 100mm
15 off 6.3mm x 90mm
20 off 5.0mm x 80mm
20 off 4.0mm x 60mm
20 off 3.2mm x 40mm
20 off 2.0mm x 30mm
TiTAN Steel Winch
Steel Body Construction
Supplied with...
20m Wire Cable on a coil frame with Sling Hook and Sring Latch fitted to one end.
2 Spare Load Share Pins inside winch carry handle
* Made in Australia, exclusive to HES NZ
* Rated to suit G100 Lifting Components
* Forged Steel - Grade 300PLUS
* 4:1 Safety Factor to AS1554
* Full Lifting Working Load (WLL) ALL Angles
* Double WLL for Lashing (PULL) Applications
* Non Stock Indent Item
* No Markings
* Not Load Rated for Lifting Applications
* Mild Steel Material
Delivery approx 6-7 months from receipt of order..
Manufactured to USA Fed Spec FF-T-791b
Safety Factor 5:1
Un Marked - Jaw to Jaw
C/w Bolt & Nut
Not Load Rated
* Electro Galvanised Protection Finish
Italy Design
Electro Galvanised Finish
6mm Length 140mm - 205mm
8mm Length 160mm - 240mm
10mm Length 190mm - 290mm
12mm Length 210mm - 305mm
16mm Length 270mm - 400mm
Not Load Rated
Ideal for joining G70 Transport Chain
* Forged Alloy Steel
* Quenched & Tempered
* 2:1 Safety Factor for Lashing Only
* NOT for lifting applications
7-8mm Suits - 7mm & 8mm G70 Chain
10mm Suits - 10mm G70 Chain
13mm Suits - 13mm G70 Chain
Complies with BS4278-1
Marked with Thread Type, Size, Rating, Batch No.
3/8"x 17mm 0.25T WLL - Eye 13mm ID
1/2"x 18mm 0.40T WLL - Eye 19mm ID
5/8"x 25mm 0.80T WLL - Eye 23mm ID
3/4"x 31mm 1.60T WLL - Eye 28mm ID
7/8"x 37mm 2.00T WLL - Eye 32mm ID
1.0"x 38mm 2.50T WLL - Eye 37mm ID
1.1/4"x 50mm 5.00T WLL - Eye 48mm ID
* Unique Identification
* Manufactured "Inhouse" Luxembourg
* International Standards EN1677-1
* Full Factory Traceability
* Certificate supplied with Product
* Huge 5:1 Safety Factor
* 180 Degree Pivot Under Load
* 360 Degree Swivel Under Load
* Listed WLL at 0 & 90 Degrees
* Unique Identification
* Manufactured "Inhouse" Luxembourg
* International Standards EN1677-1
* Full Factory Traceability
* Certificate supplied with Product
* Huge 5:1 Safety Factor
* 360 Degree Under Load
* Listed WLL at 0 & 90 Degrees
TOWNLEY Grade 4
TOWNLEY Grade 4
TOWNLEY Grade 4
